2015

 1. Amamou, W., P. M. Odenthal, E. J. Bushong, D. J. O’Hara, Y. Kelly Luo, J. van Baren, I. Pinchuk, Y. Wu, A. S. Ahmed, J. Katoch, M. W. Bockrath, H. W. K. Tom, J. E. Goldberger, & R. K. Kawakami (2015), Large area epitaxial germanane for electronic devices, 2D Materials, 2(3), 035012.

2. Bahreini, R., J. Xue, K. Johnson, T. Durbin, D. Quiros, S. Hu, T. Huai, A. Ayala, & H. Jung (2015), Characterizing emissions and optical properties of particulate matter from pfi and gdi light-duty gasoline vehicles, Journal of Aerosol Science, 90, 144-153.

3. Bay, H. H. (2015), Design, synthesis and characterization of novel graphene-based nanoarchitectures for sustainability, Ph.D. thesis, University of California, Riverside, United States -- California.

4. Bell, J., R. Ye, K. Ahmed, C. Liu, M. Ozkan, & C. S. Ozkan (2015), Free-standing ni–NiO nanofiber cloth anode for high capacity and high rate li-ion batteries, Nano Energy, 18, 47-56.

5. Campbell, B., J. Bell, H. H. Bay, Z. Favors, R. Ionescu, C. S. Ozkan, & M. Ozkan (2015), SiO2 -coated sulfur particles with mildly reduced graphene oxide as a cathode material for lithium–sulfur batteries, Nanoscale, 7(16), 7051-7055.

6. Campbell, B., R. Ionescu, Z. Favors, C. S. Ozkan, & M. Ozkan (2015), Bio-derived, binderless, hierarchically porous carbon anodes for li-ion batteries, Scientific Reports, 5(1), 14575.

7. Cipriano, A. F., A. Sallee, R.-G. Guan, Z.-Y. Zhao, M. Tayoba, J. Sanchez, & H. Liu (2015), Investigation of magnesium–zinc–calcium alloys and bone marrow derived mesenchymal stem cell response in direct culture, Acta Biomaterialia, 12, 298-321.

8. de Obaldia, E. E., C. Jeong, L. K. Grunenfelder, D. Kisailus, & P. Zavattieri (2015), Analysis of the mechanical response of biomimetic materials with highly oriented microstructures through 3d printing, mechanical testing and modeling, Journal of the Mechanical Behavior of Biomedical Materials, 48, 70-85.

9. Exarhos, S. (2015), Aerosol spray pyrolysis synthesis of czts nanostructures for photovoltaic applications [master of science thesis, university of california, riverside], UC Riverside.

10. Farley, R. D. (2015), Book lung development in the embryo, postembryo and first instar of the cobweb spider, parasteatoda tepidariorum c. L koch, 1841 (araneomorphae, theridiidae), Arthropod Structure & Development, 44(4), 355-377.

11. Favors, Z., H. H. Bay, Z. Mutlu, K. Ahmed, R. Ionescu, R. Ye, M. Ozkan, & C. S. Ozkan (2015), Towards scalable binderless electrodes: Carbon coated silicon nanofiber paper via mg reduction of electrospun sio2 nanofibers, Scientific Reports, 5(1), 8246.

12. Favors, Z., W. Wang, H. H. Bay, A. George, M. Ozkan, & C. S. Ozkan (2015), Stable cycling of sio2 nanotubes as high-performance anodes for lithium-ion batteries, Scientific Reports, 4(1), 4605.

13. Favors, Z., W. Wang, H. H. Bay, Z. Mutlu, K. Ahmed, C. Liu, M. Ozkan, & C. S. Ozkan (2015), Scalable synthesis of nano-silicon from beach sand for long cycle life li-ion batteries, Scientific Reports, 4(1), 5623.

14. Garcia, D., J. Butler, N. Amos, & S. Kumar (2015), Electric current induced coercivity change in co/pd multilayer thin films, Journal of Applied Physics, 118(15), 153902.

15. Green, H. W., F. Shi, K. Bozhilov, G. Xia, & Z. Reches (2015), Phase transformation and nanometric flow cause extreme weakening during fault slip, Nature Geoscience, 8(6), 484-U491.

16. Guarín-Zapata, N., J. Gomez, N. Yaraghi, D. Kisailus, & P. D. Zavattieri (2015), Shear wave filtering in naturally-occurring bouligand structures, Acta Biomaterialia, 23, 11-20.

17. Hu, Y., L. He, X. Han, M. Wang, & Y. Yin (2015), Magnetically responsive photonic films with high tunability and stability, Nano Research, 8(2), 611-620.

18. Ionescu, R., I. Ruiz, Z. Favors, B. Campbell, M. R. Neupane, D. Wickramaratne, K. Ahmed, C. Liu, N. Abrahamian, R. K. Lake, M. Ozkan, & C. S. Ozkan (2015), Two step growth phenomena of molybdenum disulfide–tungsten disulfide heterostructures, Chemical Communications, 51(56), 11213-11216.

19. Iskandar, M. E., A. Aslani, Q. Tian, & H. Liu (2015), Nanostructured calcium phosphate coatings on magnesium alloys: Characterization and cytocompatibility with mesenchymal stem cells, Journal of Materials Science: Materials in Medicine, 26(5), 189.

20. Kumar, S., D. Garcia, J. Jin, & A. Haque (2015), Mechanical strain mediated carrier scattering and its role in charge and thermal transport in freestanding nanocrystalline aluminum thin films, Journal of Vacuum Science & Technology B, Nanotechnology and Microelectronics: Materials, Processing, Measurement, and Phenomena, 33(2), 022002.

21. Kwon, S. R., S. R. Kurti, U. Oyoyo, & Y. Li (2015), Effect of various tooth whitening modalities on microhardness, surface roughness and surface morphology of the enamel, Odontology, 103(3), 274-279.

22. Li, Y., & F. Zaera (2015), Sensitivity of the glycerol oxidation reaction to the size and shape of the platinum nanoparticles in pt/sio2 catalysts, Journal of Catalysis, 326, 116-126.

23. Lim, T., & A. A. Martinez-Morales (2015), Template-free and low temperature cvd synthesis of vertically aligned 1-d nanostructures for photovoltaic devices by precursor oxidation protection, paper presented at Symposium Semiconductor Nanowires and Devices for Advanced Applications Symposium, Cambridge University Press, 2015.

24. Liu, D.-S., Y. Sui, W.-T. Chen, & P. Feng (2015), Two new nonlinear optical and ferroelectric zn(ii) compounds based on nicotinic acid and tetrazole derivative ligands, Crystal Growth & Design, 15(8), 4020-4025.

25. Maldonado, M., L. Y. Wong, C. Echeverria, G. Ico, K. Low, T. Fujimoto, J. K. Johnson, & J. Nam (2015), The effects of electrospun substrate-mediated cell colony morphology on the self-renewal of human induced pluripotent stem cells, Biomaterials, 50, 10-19.

26. Mao, C., A. Kong, Y. Wang, X. Bu, & P. Feng (2015), Mil-100 derived nitrogen-embodied carbon shells embedded with iron nanoparticles, Nanoscale, 7(24), 10817-10822.

27. Melinte, G., V. Georgieva, M.-A. Springuel-Huet, A. Nossov, O. Ersen, F. Guenneau, A. Gedeon, A. Palčić, K. N. Bozhilov, C. Pham-Huu, S. Qiu, S. Mintova, & V. Valtchev (2015), 3d study of the morphology and dynamics of zeolite nucleation, Chemistry – A European Journal, 21(50), 18316-18327.

28. Melinte, G., V. Georgieva, M. A. Springuel-Huet, A. Nossov, O. Ersen, F. Guenneau, A. Gedeon, A. Palcic, K. N. Bozhilov, C. Pham-Huu, S. L. Qiu, S. Mintova, & V. Valtchev (2015), 3d study of the morphology and dynamics of zeolite nucleation, Chemistry-a European Journal, 21(50), 18316-18327.

29. Moon, C. H. (2015), Investigation of bio-directed assembly of metal oxide and metal nanomaterials for chemiresistive gas sensor [doctoral dissertation, university of california, riverside], eScholarship Publishing.

30. Moon, C. H., M. Tousi, J. Cheeney, T.-T. Ngo-Duc, Z. Zuo, J. Liu, & E. D. Haberer (2015), Effects of 8-mer acidic peptide concentration on the morphology and photoluminescence of synthesized zno nanomaterials, Applied Physics A, 121(2), 757-763.

31. Mutlu, Z., M. Ozkan, & C. S. Ozkan (2015), Tin disulfide thin films via soft chalcogenization, paper presented at SPIE Nanoscience + Engineering, 2015-9-16.

32. Nalbandian, M. J., K. E. Greenstein, D. Shuai, M. Zhang, Y.-H. Choa, G. F. Parkin, N. V. Myung, & D. M. Cwiertny (2015), Tailored synthesis of photoactive tio ₂ nanofibers and au/tio ₂ nanofiber composites: Structure and reactivity optimization for water treatment applications, Environmental Science & Technology, 49(3), 1654-1663.

33. Rapicavoli, J. N., N. Kinsinger, T. M. Perring, E. A. Backus, H. J. Shugart, S. Walker, & M. C. Roper (2015), O antigen modulates insect vector acquisition of the bacterial plant pathogen xylella fastidiosa, Applied and Environmental Microbiology, 81(23), 8145-8154.

34. Sasan, K., A. Kong, Y. Wang, M. Chengyu, Q. Zhai, & P. Feng (2015), From hemoglobin to porous n–s–fe-doped carbon for efficient oxygen electroreduction, The Journal of Physical Chemistry C, 119(24), 13545-13550.

35. Stebbins, N. D., J. J. Faig, W. Yu, R. Guliyev, & K. E. Uhrich (2015), Polyactives: Controlled and sustained bioactive release via hydrolytic degradation, Biomaterials Science, 3(8), 1171-1187.

36. Terse-Thakoor, T., K. Komori, P. Ramnani, I. Lee, & A. Mulchandani (2015), Electrochemically functionalized seamless three-dimensional graphene-carbon nanotube hybrid for direct electron transfer of glucose oxidase and bioelectrocatalysis, Langmuir, 31(47), 13054-13061.

37. Tian, Q., & H. Liu (2015), Electrophoretic deposition and characterization of nanocomposites and nanoparticles on magnesium substrates, Nanotechnology, 26(17), 175102.

38. Wang, W., Z. Favors, R. Ionescu, R. Ye, H. H. Bay, M. Ozkan, & C. S. Ozkan (2015), Monodisperse porous silicon spheres as anode materials for lithium ion batteries, Scientific Reports, 5(1), 8781.

39. Wang, W., S. Guo, I. Lee, K. Ahmed, J. Zhong, Z. Favors, F. Zaera, M. Ozkan, & C. S. Ozkan (2015), Hydrous ruthenium oxide nanoparticles anchored to graphene and carbon nanotube hybrid foam for supercapacitors, Scientific Reports, 4(1), 4452.

40. Wang, W., I. Ruiz, I. Lee, F. Zaera, M. Ozkan, & C. S. Ozkan (2015), Improved functionality of graphene and carbon nanotube hybrid foam architecture by uv-ozone treatment, Nanoscale(15), 7045-7050.

41. Williams, M., A. To, K. Bozhilov, & P. Talbot (2015), Strategies to reduce tin and other metals in electronic cigarette aerosol, PLoS ONE, 10(9).

42. Yasar-Inceoglu, O., L. Zhong, & L. Mangolini (2015), Core/shell silicon/polyaniline particles via in-flight plasma-induced polymerization, Journal of Physics D: Applied Physics, 48(31), 314009.

43. Zhong, L., J. Guo, & L. Mangolini (2015), A stable silicon anode based on the uniform dispersion of quantum dots in a polymer matrix, Journal of Power Sources, 273, 638-644.

44. Zhong, L., T. Kwok, & L. Mangolini (2015), Spray pyrolysis of yolk–shell particles and their use for anodes in lithium-ion batteries, Electrochemistry Communications, 53, 1-5.

45. Zhu, J., K. Yoo, A. Denduluri, W. Hou, J. Guo, & D. Kisailus (2015), Crystal structure and size effects on the performance of Li[Ni_1/3 Co_1/3 Mn_1/3 ]O₂ cathodes, Journal of Materials Research, 30(2), 286-294.

2016

46. Aldosary, M., J. X. Li, C. Tang, Y. D. Xu, J. G. Zheng, K. N. Bozhilov, & J. Shi (2016), Platinum/yttrium iron garnet inverted structures for spin current transport, Applied Physics Letters, 108(24).

47. Alvarez, A., S. Exarhos, & L. Mangolini (2016), Tin disulfide segregation on czts films sulfurized at high pressure, Materials Letters, 165, 41-44.

48. Baca, A. J., H. A. Meylemans, L. Baldwin, L. R. Cambrea, J. Feng, Y. Yin, & M. J. Roberts (2016), Agins2quantum dots for the detection of trinitrotoluene, Nanotechnology, 28(1), 015501.

49. Bay, H. H., D. Patino, Z. Mutlu, P. Romero, M. Ozkan, & C. S. Ozkan (2016), Scalable multifunctional ultra-thin graphite sponge: Free-standing, superporous, superhydrophobic, oleophilic architecture with ferromagnetic properties for environmental cleaning, Scientific Reports, 6(1), 21858.

50. Campbell, B., R. Ionescu, C. S. Ozkan, & M. Ozkan (2016), Structural and compositional characterization of fungus-derived pyrolytic carbon architectures, Advances in Materials Science and Engineering, 2016, 1-8.

51. Campbell, B., R. Ionescu, M. Tolchin, K. Ahmed, Z. Favors, K. N. Bozhilov, C. S. Ozkan, & M. Ozkan (2016), Carbon-coated, diatomite-derived nanosilicon as a high rate capable li-ion battery anode, Scientific Reports, 6(1), 33050.

52. Campbell, B. J. (2016), Development of high performance, next-generation li-ion battery electrode materials: Sulfur, carbon and silicon [doctoral dissertation, university of california, riverside], Ph.D. thesis, University of California, Riverside.

53. Cipriano, A. F. (2016), Development and optimization of magnesium alloys and oxide surface treatments for orthopedic implant applications, Ph.D. thesis, 418 pp, University of California, Riverside.

54. D. Volodchenkov, A., Y. Kodera, & J. E. Garay (2016), Synthesis of strontium ferrite/iron oxide exchange coupled nano-powders with improved energy product for rare earth free permanent magnet applications, Journal of Materials Chemistry C, 4(24), 5593-5601.

55. Duan, W., A. Ronen, J. V. de Leon, A. Dudchenko, S. Yao, J. Corbala-Delgado, A. Yan, M. Matsumoto, & D. Jassby (2016), Treating anaerobic sequencing batch reactor effluent with electrically conducting ultrafiltration and nanofiltration membranes for fouling control, Journal of Membrane Science, 504, 104-112.

56. Duan, W., A. Ronen, S. Walker, & D. Jassby (2016), Polyaniline-coated carbon nanotube ultrafiltration membranes: Enhanced anodic stability for in situ cleaning and electro-oxidation processes, ACS Applied Materials & Interfaces, 8(34), 22574-22584.

57. Dupuy, A. D., Y. Kodera, & J. E. Garay (2016), Unprecedented electro-optic performance in lead-free transparent ceramics, Advanced Materials, 28(36), 7970-7977.

58. Escobar de Obaldia, E., S. Herrera, L. K. Grunenfelder, D. Kisailus, & P. Zavattieri (2016), Competing mechanisms in the wear resistance behavior of biomineralized rod-like microstructures, Journal of the Mechanics and Physics of Solids, 96, 511-534.

59. Farley, R. D. (2016), Book lung development in embryos of the cobweb spider, parasteatoda tepidariorum c. L. Koch, 1841 (araneomorphae, theridiidae), Arthropod Structure & Development, 45(6), 562-584.

60. Fu, C. Y., G. H. Li, J. Zhang, B. Cornejo, S. S. Piao, K. N. Bozhilov, R. C. Haddon, & J. C. Guo (2016), Electrochemical lithiation of covalently bonded sulfur in vulcanized polyisoprene, ACS Energy Letters, 1(1), 115-120.

61. Fu, C. Y., B. M. Wong, K. N. Bozhilov, & J. C. Guo (2016), Solid state lithiation-delithiation of sulphur in sub-nano confinement: A new concept for designing lithium-sulphur batteries, Chemical Science, 7(2), 1224-1232.

62. Hoey-Chamberlain, R., & C. Weirauch (2016), Two new genera of big-eyed minute litter bugs (hemiptera, schizopteridae, hypselosomatinae) from brazil and the caribbean, ZooKeys(640), 79-102.

63. Holden, M. S., J. Black, A. Lewis, M.-C. Boutrin, E. Walemba, T. S. Sabir, D. S. Boskovic, A. Wilson, H. M. Fletcher, & C. C. Perry (2016), Antibacterial activity of partially oxidized ag/au nanoparticles against the oral pathogen porphyromonas gingivalis w83, in Journal of Nanomaterials, edited.

64. Horner, C. B., G. Ico, J. Johnson, Y. Zhao, & J. Nam (2016), Microstructure-dependent mechanical properties of electrospun core–shell scaffolds at multi-scale levels, Journal of the Mechanical Behavior of Biomedical Materials, 59, 207-219.

65. Johnson, I., S. M. Wang, C. Silken, & H. Liu (2016), A systemic study on key parameters affecting nanocomposite coatings on magnesium substrates, Acta Biomaterialia, 36, 332-349.

66. Jung, J.-Y., S. E. Naleway, N. A. Yaraghi, S. Herrera, V. R. Sherman, E. A. Bushong, M. H. Ellisman, D. Kisailus, & J. McKittrick (2016), Structural analysis of the tongue and hyoid apparatus in a woodpecker, Acta Biomaterialia, 37, 1-13.

67. Kale, M. J. (2016), Impacts of metal-adsorbate bonds on photon activation mechanism and nanoparticle reconstruction in heterogeneous catalysis, UC Riverside.

68. Lim, T. (2016), Nanoengineering of zno electrical and optical characteristics by controlling its morphology and defects via reaction kinetics, fluid dynamics, and stoichiometry in low-pressure cvd synthesis [doctoral dissertation, university of california, riverside], UC Riverside.

69. Liu, C., C. Li, K. Ahmed, Z. Mutlu, C. S. Ozkan, & M. Ozkan (2016), Template free and binderless nio nanowire foam for li-ion battery anodes with long cycle life and ultrahigh rate capability, Scientific Reports, 6(1), 29183.

70. Liu, C., C. Li, K. Ahmed, W. Wang, I. Lee, F. Zaera, C. S. Ozkan, & M. Ozkan (2016), Scalable, binderless, and carbonless hierarchical ni nanodendrite foam decorated with hydrous ruthenium dioxide for 1.6 v symmetric supercapacitors, Advanced Materials Interfaces, 3(6), 1500503.

71. Ma, X., Y. Zhu, S. Kim, Q. Liu, P. Byrley, Y. Wei, J. Zhang, K. Jiang, S. Fan, R. Yan, & M. Liu (2016), Sharp-tip silver nanowires mounted on cantilevers for high-aspect-ratio high-resolution imaging, Nano Letters, 16(11), 6896-6902.

72. Maldonado, M., G. Ico, K. Low, R. J. Luu, & J. Nam (2016), Enhanced lineage-specific differentiation efficiency of human induced pluripotent stem cells by engineering colony dimensionality using electrospun scaffolds, Advanced Healthcare Materials, 5(12), 1408-1412.

73. Maldonado, M., R. J. Luu, M. E. P. Ramos, & J. Nam (2016), Rock inhibitor primes human induced pluripotent stem cells to selectively differentiate towards mesendodermal lineage via epithelial-mesenchymal transition-like modulation, Stem Cell Research, 17(2), 222-227.

74. Martynov, O. (2016), Production and characterization of carbon nanoscrolls, Ph.D. thesis, 182 pp, University of California, Riverside, United States -- California.

75. Matsubu, J. C., E. T. Lin, K. L. Gunther, K. N. Bozhilov, Y. B. Jiang, & P. Christopher (2016), Critical role of interfacial effects on the reactivity of semiconductor-cocatalyst junctions for photocatalytic oxygen evolution from water, Catalysis Science & Technology, 6(18), 6836-6844.

76. Mutlu, Z., M. Ozkan, & C. S. Ozkan (2016), Large area synthesis, characterization, and anisotropic etching of two dimensional tungsten disulfide films, Materials Chemistry and Physics, 176, 52-57.

77. Mutlu, Z., S. Shahrezaei, S. Temiz, M. Ozkan, & C. S. Ozkan (2016), Facile synthesis and characterization of two dimensional layered tin disulfide nanowalls, Journal of Electronic Materials, 45(4), 2115-2120.

78. Mutlu, Z., R. J. Wu, D. Wickramaratne, S. Shahrezaei, C. Liu, S. Temiz, A. Patalano, M. Ozkan, R. K. Lake, K. A. Mkhoyan, & C. S. Ozkan (2016), Phase engineering of 2d tin sulfides, Small, 12(22), 2998-3004.

79. Obayemi, J. D., Y. Danyuo, S. Dozie-Nwachukwu, O. S. Odusanya, N. Anuku, K. Malatesta, W. Yu, K. E. Uhrich, & W. O. Soboyejo (2016), Plga-based microparticles loaded with bacterial-synthesized prodigiosin for anticancer drug release: Effects of particle size on drug release kinetics and cell viability, Materials Science and Engineering: C, 66, 51-65.

80. Overman, N. R., S. N. Mathaudhu, J. P. Choi, T. J. Roosendaal, & S. Pitman (2016), Microstructure and mechanical properties of a novel rapidly solidified, high-temperature al-alloy, Materials Characterization, 112, 142-148.

81. Plascencia-Hernández, F., G. Valverde-Aguilar, N. Singh, A. R. Derk, E. W. McFarland, F. Zaera, N. Cayetano-Castro, R. Vázquez-Arreguín, & M. A. Valenzuela (2016), Photocatalytic hydrogen production from aqueous methanol solution using pt nanocatalysts supported on mesoporous tio2 hollow shells, Journal of Sol-Gel Science and Technology, 77(1), 39-47.

82. Prikhodko, S. V., P. E. Markovsky, S. D. Sitzman, M. A. Gordillo, J. M. K. Wiezorek, & O. M. Ivasishin (2016), Selectivity of burgers orientation relationship variants during β->α transformation in β-titanuim alloy vt22 under severe hot forging and rolling, in Proceedings of the 13th world conference on titanium, edited by V. Venkatesh, et al., pp. 415-418, John Wiley & Sons, Inc., Hoboken, NJ, USA.

83. Qin, Z. X., G. Melinte, J. P. Gilson, M. Jaber, K. Bozhilov, P. Boullay, S. Mintova, O. Ersen, & V. Valtchev (2016), The mosaic structure of zeolite crystals, Angewandte Chemie-International Edition, 55(48), 15049-15052.

84. Ramnani, P. G. (2016), Thermal and electronic transport in graphene-based nanostructures and applications in electrical sensors, Ph.D. thesis, 156 pp, University of California, Riverside.

85. Ren, H., J. Sun, R. Yu, M. Yang, L. Gu, P. Liu, H. Zhao, D. Kisailus, & D. Wang (2016), Controllable synthesis of mesostructures from tio 2 hollow to porous nanospheres with superior rate performance for lithium ion batteries, Chemical Science, 7(1), 793-798.

86. Sanscartier, C. A. (2016), Induction of ileal microfold cells produced by cholera toxin enhances bacterial adherence, M.S. thesis, 56 pp, University of California, Riverside, United States -- California.

87. Shen, J., K. Kondoh, T. L. Jones, S. N. Mathaudhu, L. J. Kecskes, & Q. Wei (2016), Effect of strain rate on the mechanical properties of magnesium alloy amx602, Materials Science and Engineering: A, 649, 338-348.

88. Stolyarov, M. A., G. X. Liu, M. A. Bloodgood, E. Aytan, C. L. Jiang, R. Samnakay, T. T. Salguero, D. L. Nika, S. L. Rumyantsev, M. S. Shur, K. N. Bozhilov, & A. A. Balandin (2016), Breakdown current density in h-bn-capped quasi-1d tase3 metallic nanowires: Prospects of interconnect applications, Nanoscale, 8(34), 15774-15782.

89. Sullivan, T. N., A. Pissarenko, S. A. Herrera, D. Kisailus, V. A. Lubarda, & M. A. Meyers (2016), A lightweight, biological structure with tailored stiffness: The feather vane, Acta Biomaterialia, 41, 27-39.

90. Tang, C., M. Aldosary, Z. Jiang, H. Chang, B. Madon, K. Chan, M. Wu, J. E. Garay, & J. Shi (2016), Exquisite growth control and magnetic properties of yttrium iron garnet thin films, Applied Physics Letters, 108(10), 102403.

91. Tian, Q., M. Deo, L. Rivera-Castaneda, & H. Liu (2016), Cytocompatibility of magnesium alloys with human urothelial cells: A comparison of three culture methodologies, ACS Biomaterials Science & Engineering, 2(9), 1559-1571.

92. Wetteland, C. L., N.-Y. T. Nguyen, & H. Liu (2016), Concentration-dependent behaviors of bone marrow derived mesenchymal stem cells and infectious bacteria toward magnesium oxide nanoparticles, Acta Biomaterialia, 35, 341-356.

93. Wieg, A. T., E. H. Penilla, C. L. Hardin, Y. Kodera, & J. E. Garay (2016), Broadband white light emission from ce:Aln ceramics: High thermal conductivity down-converters for led and laser-driven solid state lighting, APL Materials, 4(12), 126105.

94. Yan, Y., M. Zhang, C. H. Moon, H.-C. Su, N. V. Myung, & E. D. Haberer (2016), Viral-templated gold/polypyrrole nanopeapods for an ammonia gas sensor, Nanotechnology, 27(32), 325502.

95. Yaraghi, N. A., N. Guarín‐Zapata, L. K. Grunenfelder, E. Hintsala, S. Bhowmick, J. M. Hiller, M. Betts, E. L. Principe, J.-Y. Jung, L. Sheppard, R. Wuhrer, J. McKittrick, P. D. Zavattieri, & D. Kisailus (2016), A sinusoidally architected helicoidal biocomposite, Advanced Materials, 28(32), 6835-6844.

96. Zhong, L., C. Beaudette, J. Guo, K. Bozhilov, & L. Mangolini (2016), Tin nanoparticles as an effective conductive additive in silicon anodes, Scientific Reports, 6(1), 30952.

2017

97. Alvarez Barragan, A., N. V. Ilawe, L. Zhong, B. M. Wong, & L. Mangolini (2017), A non-thermal plasma route to plasmonic tin nanoparticles, The Journal of Physical Chemistry C, 121(4), 2316-2322.

98. Avanesian, T., S. Dai, M. J. Kale, G. W. Graham, X. Pan, & P. Christopher (2017), Quantitative and atomic-scale view of co-induced pt nanoparticle surface reconstruction at saturation coverage via dft calculations coupled with in situ tem and ir, Journal of the American Chemical Society, 139(12), 4551-4558.

99. Bloodgood, M. A., P. Wei, E. Aytan, K. N. Bozhilov, A. A. Balandin, & T. T. Salguero (2017), Monoclinic structures of niobium trisulfide, APL Materials, 2DMC2018(1), 026602.

100. Byrley, P. S. (2017), Engineering low-dimensional nanostructures towards flexible electronics.

101. Cipriano, A. F., J. Lin, A. Lin, A. Sallee, B. Le, M. C. Cortez Alcaraz, R.-G. Guan, G. Botimer, S. Inceoğlu, & H. Liu (2017), Degradation of bioresorbable mg–4zn–1sr intramedullary pins and associated biological responses in vitro and in vivo, ACS Applied Materials & Interfaces, 9(51), 44332-44355.

102. Cipriano, A. F., J. Lin, C. Miller, A. Lin, M. C. Cortez Alcaraz, P. Soria, & H. Liu (2017), Anodization of magnesium for biomedical applications – processing, characterization, degradation and cytocompatibility, Acta Biomaterialia, 62, 397-417.

103. Cipriano, A. F., A. Sallee, R.-G. Guan, A. Lin, & H. Liu (2017), A comparison study on the degradation and cytocompatibility of mg-4zn- x sr alloys in direct culture, ACS Biomaterials Science & Engineering, 3(4), 540-550.

104. Cipriano, A. F., A. Sallee, M. Tayoba, M. C. Cortez Alcaraz, A. Lin, R.-G. Guan, Z.-Y. Zhao, & H. Liu (2017), Cytocompatibility and early inflammatory response of human endothelial cells in direct culture with mg-zn-sr alloys, Acta Biomaterialia, 48, 499-520.

105. Daya, R. J. (2017), Hyaluronic acid hydrogels loaded with curcumin-coated magnetic nanoparticles for angiogenesis in bone tissue engineering, M.S. thesis, 56 pp, University of California, Riverside.

106. Derimow, N., L. Santodonato, R. Mills, & R. Abbaschian (2017), In-situ imaging of liquid phase separation in molten alloys using cold neutrons, Journal of Imaging, 4(1), 5.

107. DeRita, L., S. Dai, K. Lopez-Zepeda, N. Pham, G. W. Graham, X. Pan, & P. Christopher (2017), Catalyst architecture for stable single atom dispersion enables site-specific spectroscopic and reactivity measurements of co adsorbed to pt atoms, oxidized pt clusters, and metallic pt clusters on tio2, Journal of the American Chemical Society, 139(40), 14150-14165.

108. Duan, W., G. Chen, C. Chen, R. Sanghvi, A. Iddya, S. Walker, H. Liu, A. Ronen, & D. Jassby (2017), Electrochemical removal of hexavalent chromium using electrically conducting carbon nanotube/polymer composite ultrafiltration membranes, Journal of Membrane Science, 531, 160-171.

109. Dudchenko, A. V., C. Chen, A. Cardenas, J. Rolf, & D. Jassby (2017), Frequency-dependent stability of cnt joule heaters in ionizable media and desalination processes, Nature Nanotechnology, 12(6), 557-563.

110. Exarhos, S., E. Palmes, R. Xu, & L. Mangolini (2017), Oxide-induced grain growth in czts nanoparticle coatings, RSC Advances, 7(41), 25575-25581.

111. Gao, A., W. Xu, Y. P. d. León, Y. Bai, M. Gong, K. Xie, B. H. Park, & Y. Yin (2017), Controllable fabrication of au nanocups by confined-space thermal dewetting for oct imaging, Advanced Materials, 29(26), 1701070.

112. Geng, L., J. P. Scheifers, C. Fu, J. Zhang, B. P. T. Fokwa, & J. Guo (2017), Titanium sulfides as intercalation-type cathode materials for rechargeable aluminum batteries, ACS Applied Materials & Interfaces, 9(25), 21251-21257.

113. Hart, N. (2017), Synthesis of lithium sulfide carbon composites via aerosol spray pyrolysis, Ph.D. thesis, University of California, Riverside, United States -- California.

114. Hou, W. T., P. Cortez, R. Wuhrer, S. Macartney, K. N. Bozhilov, R. Liu, L. R. Sheppard, & D. Kisailus (2017), Oriented epitaxial tio2 nanowires for water splitting, Nanotechnology, 28(26).

115. Ionescu, R., B. Campbell, R. Wu, E. Aytan, A. Patalano, I. Ruiz, S. W. Howell, A. E. McDonald, T. E. Beechem, K. A. Mkhoyan, M. Ozkan, & C. S. Ozkan (2017), Chelant enhanced solution processing for wafer scale synthesis of transition metal dichalcogenide thin films, Scientific Reports, 7(1), 6419.

116. Jeong, D.-W., J. Y. Park, H. W. Seo, N. V. Myung, T.-Y. Seong, & B. S. Kim (2017), One-pot synthesis of gradient interface quaternary zncdsse quantum dots, Applied Surface Science, 415, 19-23.

117. Jiang, W., D. Rutherford, T. Vuong, & H. Liu (2017), Nanomaterials for treating cardiovascular diseases: A review, Bioactive Materials, 2(4), 185-198.

118. Jiang, W., Q. Tian, T. Vuong, M. Shashaty, C. Gopez, T. Sanders, & H. Liu (2017), Comparison study on four biodegradable polymer coatings for controlling magnesium degradation and human endothelial cell adhesion and spreading, ACS Biomaterials Science & Engineering, 3(6), 936-950.

119. Kale, M. J., D. Gidcumb, F. J. Gulian, S. P. Miller, C. H. Clark, & P. Christopher (2017), Evaluation of platinum catalysts for naval submarine pollution control, Applied Catalysis B: Environmental, 203, 533-540.

120. Kim, J., H. Jung, J.-H. Lim, & N. V. Myung (2017), Facile control of interfacial energy-barrier scattering in antimony telluride electrodeposits, Journal of Electronic Materials, 46(4), 2347-2355.

121. Kim, S., Y.-I. Lee, S. H. Ryu, T.-Y. Hwang, Y. Song, S. Seo, B. Yoo, J.-H. Lim, H.-B. Cho, N. V. Myung, & Y.-H. Choa (2017), Synthesis and thermoelectric characterization of bulk-type tellurium nanowire/polymer nanocomposites, Journal of Materials Science, 52(21), 12724-12733.

122. Li, C., C. Liu, K. Ahmed, Z. Mutlu, Y. Yan, I. Lee, M. Ozkan, & C. S. Ozkan (2017), Kinetics and electrochemical evolution of binary silicon–polymer systems for lithium ion batteries, RSC Advances, 7(58), 36541-36549.

123. Li, C., C. Liu, W. Wang, Z. Mutlu, J. Bell, K. Ahmed, R. Ye, M. Ozkan, & C. S. Ozkan (2017), Silicon derived from glass bottles as anode materials for lithium ion full cell batteries, Scientific Reports, 7(1), 917.

124. Li, K., N. J. Hogan, M. J. Kale, N. J. Halas, P. Nordlander, & P. Christopher (2017), Balancing near-field enhancement, absorption, and scattering for effective antenna–reactor plasmonic photocatalysis, Nano Letters, 17(6), 3710-3717.

125. Liu, C., C. Li, W. Wang, M. Ozkan, & C. S. Ozkan (2017), Facile synthesis of nickel nanofoam architectures for applications in li-ion batteries, Energy Technology, 5(3), 422-427.

126. Low, K., L. Y. Wong, M. Maldonado, C. Manjunath, C. B. Horner, M. Perez, N. V. Myung, & J. Nam (2017), Physico-electrochemical characterization of pluripotent stem cells during self-renewal or differentiation by a multi-modal monitoring system, Stem Cell Reports, 8(5), 1329-1339.

127. Lu, D., M. Macchietto, D. Chang, M. M. Barros, J. Baldwin, A. Mortazavi, & A. R. Dillman (2017), Activated entomopathogenic nematode infective juveniles release lethal venom proteins, PLOS Pathogens, 13(4), e1006302.

128. Madrigal-Monge, G., & C. Chaves-Villareal (2017), Cvd growth of zno nanorods in situ on graphene and the study of its application as photoanode for solar cells, Revista Tecnología en Marcha, 30(5), 104.

129. Mao, C., Y. Wang, W. Jiao, X. Chen, Q. Lin, M. Deng, Y. Ling, Y. Zhou, X. Bu, & P. Feng (2017), Integrating zeolite-type chalcogenide with titanium dioxide nanowires for enhanced photoelectrochemical activity, Langmuir, 33(47), 13634-13639.

130. Martynov, O. V., & M. Bockrath (2017), Carbon nanotube stabilized single layer graphene cantilevers, Applied Physics Letters, 110(15), 151901.

131. Matsubu, J. C., S. Zhang, L. DeRita, N. S. Marinkovic, J. G. Chen, G. W. Graham, X. Pan, & P. Christopher (2017), Adsorbate-mediated strong metal–support interactions in oxide-supported rh catalysts, Nature Chemistry, 9(2), 120-127.

132. McArthur, S. G., R. Jay, L. Geng, J. Guo, & V. Lavallo (2017), Below the 12-vertex: 10-vertex carborane anions as non-corrosive, halide free, electrolytes for rechargeable mg batteries, Chemical Communications, 53(32), 4453-4456.

133. Meylemans, H. A., A. J. Baca, L. R. Cambrea, & G. S. Ostrom (2017), Selective solvent-free chromium detection using cadmium-free quantum dots, Journal of Nanophotonics, 11(03), 1.

134. Munitz, A., M. J. Kaufman, & R. Abbaschian (2017), Liquid phase separation in transition element high entropy alloys, Intermetallics, 86, 59-72.

135. Mutlu, Z., I. Ruiz, R. J. Wu, R. Ionescu, S. Shahrezaei, S. Temiz, M. Ozkan, K. A. Mkhoyan, & C. S. Ozkan (2017), Chemical vapor deposition of partially oxidized graphene, RSC Advances, 7(51), 32209-32215.

136. Nampe, D., R. Joshi, K. Keller, N. I. z. Nieden, & H. Tsutsui (2017), Impact of fluidic agitation on human pluripotent stem cells in stirred suspension culture, Biotechnology and Bioengineering, 114(9), 2109-2120.

137. Overman, N. R., S. A. Whalen, M. E. Bowden, M. J. Olszta, K. Kruska, T. Clark, E. L. Stevens, J. T. Darsell, V. V. Joshi, X. Jiang, K. F. Mattlin, & S. N. Mathaudhu (2017), Homogenization and texture development in rapidly solidified az91e consolidated by shear assisted processing and extrusion (shape), Materials Science and Engineering: A, 701, 56-68.

138. Peter, K. T., A. J. Johns, N. V. Myung, & D. M. Cwiertny (2017), Functionalized polymer-iron oxide hybrid nanofibers: Electrospun filtration devices for metal oxyanion removal, Water Research, 117, 207-217.

139. Pumwongpitak, P. (2017), Bio-inspired lithium iron phosphate for li-ion cathodes, UC Riverside.

140. Ramirez, S., K. Chan, R. Hernandez, E. Recinos, E. Hernandez, R. Salgado, A. G. Khitun, J. E. Garay, & A. A. Balandin (2017), Thermal and magnetic properties of nanostructured densified ferrimagnetic composites with graphene - graphite fillers, Materials & Design, 118, 75-80.

141. Rheem, Y., Y. Han, K. H. Lee, S.-M. Choi, & N. V. Myung (2017), Synthesis of hierarchical moo ₂ /mos ₂nanofibers for electrocatalytic hydrogen evolution, Nanotechnology, 28(10), 105605.

142. Salinas, C. L., E. E. de Obaldia, C. Jeong, J. Hernandez, P. Zavattieri, & D. Kisailus (2017), Enhanced toughening of the crossed lamellar structure revealed by nanoindentation, Journal of the Mechanical Behavior of Biomedical Materials, 76, 58-68.

143. Sato, K., N. Ozaki, K. Nakanishi, Y. Sugahara, Y. Oaki, C. Salinas, S. Herrera, D. Kisailus, & H. Imai (2017), Effects of nanostructured biosilica on rice plant mechanics, RSC Advances, 7(22), 13065-13071.

144. Seemala, B., C. M. Cai, C. E. Wyman, & P. Christopher (2017), Support induced control of surface composition in cu–ni/tio2 catalysts enables high yield co-conversion of hmf and furfural to methylated furans, ACS Catalysis, 7(6), 4070-4082.

145. Sellappan, P., C. Tang, J. Shi, & J. E. Garay (2017), An integrated approach to doped thin films with strain-tunable magnetic anisotropy: Powder synthesis, target preparation and pulsed laser deposition of bi:Yig, Materials Research Letters, 5(1), 41-47.

146. Shen, J., X. Chen, V. Hammond, L. J. Kecskes, S. N. Mathaudhu, K. Kondoh, & Q. Wei (2017), The effect of rolling on the microstructure and compression behavior of aa5083 subjected to large-scale ecae, Journal of Alloys and Compounds, 695, 3589-3597.

147. Shirazi, P., G. Ico, C. S. Anderson, M. C. Ma, B. S. Kim, J. Nam, & N. V. Myung (2017), Size-dependent piezoelectric properties of electrospun batio ₃ for enhanced energy harvesting, Advanced Sustainable Systems, 1(11), 1700091.

148. Su, F. Y., E. A. Bushong, T. J. Deerinck, K. Seo, S. Herrera, O. A. Graeve, D. Kisailus, V. A. Lubarda, & J. McKittrick (2017), Spines of the porcupine fish: Structure, composition, and mechanical properties, Journal of the Mechanical Behavior of Biomedical Materials, 73, 38-49.

149. Su, H., A. A. Barragan, L. Geng, D. Long, L. Ling, K. N. Bozhilov, L. Mangolini, & J. Guo (2017), Colloidal synthesis of silicon–carbon composite material for lithium-ion batteries, Angewandte Chemie International Edition, 56(36), 10780-10785.

150. Su, H. P., A. A. Barragan, L. X. Geng, D. H. Long, L. C. Ling, K. N. Bozhilov, L. Mangolini, & J. C. Guo (2017), Colloidal synthesis of silicon-carbon composite material for lithium-ion batteries, Angewandte Chemie-International Edition, 56(36), 10780-10785.

151. Suksangpanya, N., N. A. Yaraghi, D. Kisailus, & P. Zavattieri (2017), Twisting cracks in bouligand structures, Journal of the Mechanical Behavior of Biomedical Materials, 76, 38-57.

152. Taylor, A. A., M. Y. Khan, J. Helbley, & S. L. Walker (2017), Safety evaluation of hair-dryers marketed as emitting nano silver particles, Safety Science, 93, 121-126.

153. Tran, S., J. Yang, N. Gillgren, T. Espiritu, Y. Shi, K. Watanabe, T. Taniguchi, S. Moon, H. Baek, D. Smirnov, M. Bockrath, R. Chen, & C. N. Lau (2017), Surface transport and quantum hall effect in ambipolar black phosphorus double quantum wells, Science Advances, 3(6), e1603179.

154. Volodchenkov, A. D., S. Ramirez, R. Samnakay, R. Salgado, Y. Kodera, A. A. Balandin, & J. E. Garay (2017), Magnetic and thermal transport properties of srfe12o19 permanent magnets with anisotropic grain structure, Materials & Design, 125, 62-68.

155. Wang, W., Z. Favors, C. Li, C. Liu, R. Ye, C. Fu, K. Bozhilov, J. Guo, M. Ozkan, & C. S. Ozkan (2017), Silicon and carbon nanocomposite spheres with enhanced electrochemical performance for full cell lithium ion batteries, Scientific Reports, 7(1), 44838.

156. Wang, Y., X. Chen, Q. Lin, A. Kong, Q.-G. Zhai, S. Xie, & P. Feng (2017), Nanoporous carbon derived from a functionalized metal–organic framework as a highly efficient oxygen reduction electrocatalyst, Nanoscale, 9(2), 862-868.

157. Wang, Y.-M., J.-W. Liu, G. B. Adkins, W. Shen, M. P. Trinh, L.-Y. Duan, J.-H. Jiang, & W. Zhong (2017), Enhancement of the intrinsic peroxidase-like activity of graphitic carbon nitride nanosheets by ssdnas and its application for detection of exosomes, Analytical Chemistry, 89(22), 12327-12333.

158. Wetteland, C. L. (2017), Magnesium oxide based nanocomposites for bone repair, Ph.D. thesis, 213 pp, University of California, Riverside, United States -- California.

159. Williams, M., K. Bozhilov, S. Ghai, & P. Talbot (2017), Elements including metals in the atomizer and aerosol of disposable electronic cigarettes and electronic hookahs, PLoS ONE, 12(4).

160. Wu, Y.-P., W. Zhou, W.-W. Dong, J. Zhao, X.-Q. Qiao, D.-F. Hou, D.-S. Li, Q. Zhang, & P. Feng (2017), Temperature-controlled synthesis of porous cuo particles with different morphologies for highly sensitive detection of triethylamine, Crystal Growth & Design, 17(4), 2158-2165.

161. Xu, W., Y. Zhang, G. Cheng, S. N. Mathaudhu, R. O. Scattergood, C. C. Koch, E. J. Lavernia, & Y. Zhu (2017), On the origin and behavior of irradiation-induced c-component dislocation loops in magnesium, Acta Materialia, 131, 457-466.

162. Ye, R., J. Bell, D. Patino, K. Ahmed, M. Ozkan, & C. S. Ozkan (2017), Advanced sulfur-silicon full cell architecture for lithium ion batteries, Scientific Reports, 7(1), 17264.

163. Zhang, N. (2017), Magnetic nanocomposites and fields for tissue engineering applications, Ph.D. thesis, 244 pp, University of California, Riverside, United States -- California.

2018

164. Allard, M. M., S. N. Merlos, B. N. Springer, J. Cooper, G. Zhang, D. S. Boskovic, S. R. Kwon, K. E. Nick, & C. C. Perry (2018), Role of tio2 anatase surface morphology on organophosphorus interfacial chemistry, The Journal of Physical Chemistry C, 122(51), 29237-29248.

165. Alvarez Barragan, A., G. Nava, N. J. Wagner, & L. Mangolini (2018), Silicon-carbon composites for lithium-ion batteries: A comparative study of different carbon deposition approaches, Journal of Vacuum Science & Technology B, 36(1), 011402.

166. Bloodgood, M. A., P. R. Wei, E. Aytan, K. N. Bozhilov, A. A. Balandin, & T. T. Salguero (2018), Monoclinic structures of niobium trisulfide, APL Materials, 6(2).

167. Brunelle, A. R., C. B. Horner, K. Low, G. Ico, & J. Nam (2018), Electrospun thermosensitive hydrogel scaffold for enhanced chondrogenesis of human mesenchymal stem cells, Acta Biomaterialia, 66, 166-176.

168. Chaves Villarreal, C. M. (2018), Biophotovoltaic system built from renewable carbon: Integration of graphene hybrids and the phototrophic protein bacteriorhodopsin, Ph.D. thesis, University of California, Riverside, United States -- California.

169. Coleman, D., T. Lopez, S. Exarhos, M. Mecklenburg, S. Bux, & L. Mangolini (2018), Thermoelectric performance of silicon with oxide nanoinclusions, Materials Research Letters, 6(8), 419-425.

170. Derimow, N., & R. Abbaschian (2018), Solidification microstructures and calculated mixing enthalpies in cocrcu containing alloys, Materials Today Communications, 15, 1-10.

171. Exarhos, S., A. Alvarez-Barragan, E. Aytan, A. A. Balandin, & L. Mangolini (2018), Plasmonic core–shell zirconium nitride–silicon oxynitride nanoparticles, ACS Energy Letters, 3(10), 2349-2356.

172. Farley, R. D. (2018), Book lung development in juveniles and adults of the cobweb spider, parasteatoda tepidariorum c. L. Koch, 1841 (araneomorphae, theridiidae), Arthropod Structure & Development, 47(2), 180-198.

173. Fu, C., M. B. Oviedo, Y. Zhu, A. von Wald Cresce, K. Xu, G. Li, M. E. Itkis, R. C. Haddon, M. Chi, Y. Han, B. M. Wong, & J. Guo (2018), Confined lithium–sulfur reactions in narrow-diameter carbon nanotubes reveal enhanced electrochemical reactivity, ACS Nano, 12(10), 9775-9784.

174. Geng, L. X., J. P. Scheifers, J. Zhang, K. N. Bozhilov, B. P. T. Fokwa, & J. C. Guo (2018), Crystal structure transformation in chevrel phase mo6s8 induced by aluminum intercalation, Chemistry of Materials, 30(23), 8420-8425.

175. Geremew, A., M. A. Bloodgood, E. Aytan, B. W. K. Woo, S. R. Corber, G. Liu, K. Bozhilov, T. T. Salguero, S. Rumyantsev, M. P. Rao, & A. A. Balandin (2018), Current carrying capacity of quasi-1d zrte3 van der waals nanoribbons, IEEE Electron Device Letters, 39(5), 735-738.

176. Grunenfelder, L. K., G. Milliron, S. Herrera, I. Gallana, N. Yaraghi, N. Hughes, K. Evans‐Lutterodt, P. Zavattieri, & D. Kisailus (2018), Ecologically driven ultrastructural and hydrodynamic designs in stomatopod cuticles, Advanced Materials, 30(9), 1705295.

177. Hart, N., J. Shi, J. Zhang, C. Fu, & J. Guo (2018), Lithium sulfide–carbon composites via aerosol spray pyrolysis as cathode materials for lithium–sulfur batteries, Frontiers in Chemistry, 6.

178. Heinze, S. G. (2018), Phase equilibria and toughness of zro2-(y/yb)o 1.5-tao2.5 thermal barrier coatings, Ph.D. thesis, University of California, Santa Barbara, United States -- California.

179. Horner, C. B., K. Hirota, J. Liu, M. Maldonado, B. H. Park, & J. Nam (2018), Magnitude-dependent and inversely-related osteogenic/chondrogenic differentiation of human mesenchymal stem cells under dynamic compressive strain, Journal of Tissue Engineering and Regenerative Medicine, 12(2), e637-e647.

180. Hwang, T.-Y., Y. Choi, Y. Song, N. S. A. Eom, S. Kim, H.-B. Cho, N. V. Myung, & Y.-H. Choa (2018), A noble gas sensor platform: Linear dense assemblies of single-walled carbon nanotubes (lacnts) in a multi-layered ceramic/metal electrode system (mles), Journal of Materials Chemistry C, 6(5), 972-979.

181. Ico, G., A. Myung, B. S. Kim, N. V. Myung, & J. Nam (2018), Transformative piezoelectric enhancement of p(vdf-trfe) synergistically driven by nanoscale dimensional reduction and thermal treatment, Nanoscale, 10(6), 2894-2901.

182. Jiang, W., A. F. Cipriano, Q. Tian, C. Zhang, M. Lopez, A. Sallee, A. Lin, M. C. Cortez Alcaraz, Y. Wu, Y. Zheng, & H. Liu (2018), In vitro evaluation of MgSr and MgCaSr alloys via direct culture with bone marrow derived mesenchymal stem cells, Acta Biomaterialia, 72, 407-423.

183. Jung, J.-Y., A. Pissarenko, N. A. Yaraghi, S. E. Naleway, D. Kisailus, M. A. Meyers, & J. McKittrick (2018), A comparative analysis of the avian skull: Woodpeckers and chickens, Journal of the Mechanical Behavior of Biomedical Materials, 84, 273-280.

184. Kargar, F., E. H. Penilla, E. Aytan, J. S. Lewis, J. E. Garay, & A. A. Balandin (2018), Acoustic phonon spectrum engineering in bulk crystals via incorporation of dopant atoms, Applied Physics Letters, 112(19), 191902.

185. Karim, Z. A., N. R. Hensch, H. Qasim, F. Z. Alshbool, & F. T. Khasawneh (2018), Role of iκb kinase β in regulating the remodeling of the carma1-bcl10-malt1 complex, Biochemical and Biophysical Research Communications, 500(2), 268-274.

186. Kim, J., J.-H. Lim, & N. V. Myung (2018), Composition- and crystallinity-dependent thermoelectric properties of ternary BixSb2-x TeY films, Applied Surface Science, 429, 158-163.

187. Li, X., X. Wang, M. Liu, H. Liu, Q. Chen, Y. Yin, & M. Jin (2018), Construction of pd-m (m = ni, ag, cu) alloy surfaces for catalytic applications, Nano Research, 11(2), 780-790.

188. Lim, T., G. Ico, K. Jung, K. N. Bozhilov, J. Nam, & A. A. Martinez-Morales (2018), Crystal growth and piezoelectric characterization of mechanically stable zno nanostructure arrays, CrystEngComm, 20(38), 5688-5694.

189. Liu, C., C. Li, K. Ahmed, Z. Mutlu, I. Lee, F. Zaera, C. S. Ozkan, & M. Ozkan (2018), High-potential metalless nanocarbon foam supercapacitors operating in aqueous electrolyte, Small, 14(15), 1702444.

190. Liu, F., W. Chen, & N. V. Myung (2018), Controlled growth of gold nanocrystals on biogenic as–s nanotubes by galvanic displacement, Nanotechnology, 29(5), 055604.

191. Machev, P., E. F. O'Bannon, K. N. Bozhilov, Q. Wang, & L. Dobrzhinetskaya (2018), Not all moissanites are created equal: New constraints on moissanite from metamorphic rocks of bulgaria, Earth and Planetary Science Letters, 498, 387-396.

192. Mostafaei, A., S. H. V. R. Neelapu, C. Kisailus, L. M. Nath, T. D. B. Jacobs, & M. Chmielus (2018), Characterizing surface finish and fatigue behavior in binder-jet 3d-printed nickel-based superalloy 625, Additive Manufacturing, 24, 200-209.

193. Munitz, A., S. Samuha, E. Brosh, S. Salhov, N. Derimow, & R. Abbaschian (2018), Liquid phase separation phenomena in al 2.2 crcufeni 2 hea, Intermetallics, 97, 77-84.

194. Mutlu, Z., B. Debnath, S. Su, C. Li, M. Ozkan, K. N. Bozhilov, R. K. Lake, & C. S. Ozkan (2018), Chemical vapor deposition and phase stability of pyrite on sio ₂, Journal of Materials Chemistry C, 6(17), 4753-4759.

195. Ngo-Duc, T.-T., J. M. Plank, G. Chen, R. E. S. Harrison, D. Morikis, H. Liu, & E. D. Haberer (2018), M13 bacteriophage spheroids as scaffolds for directed synthesis of spiky gold nanostructures, Nanoscale, 10(27), 13055-13063.

196. Nguyen, N.-Y. T., N. Grelling, C. L. Wetteland, R. Rosario, & H. Liu (2018), Antimicrobial activities and mechanisms of magnesium oxide nanoparticles (nmgo) against pathogenic bacteria, yeasts, and biofilms, Scientific Reports, 8(1), 16260.

197. Overman, N. R., X. Jiang, R. K. Kukkadapu, T. Clark, T. J. Roosendaal, G. Coffey, J. E. Shield, & S. N. Mathaudhu (2018), Physical and electrical properties of melt-spun fe-si (3–8wt.%) soft magnetic ribbons, Materials Characterization, 136, 212-220.

198. Peter, K. T., N. V. Myung, & D. M. Cwiertny (2018), Surfactant-assisted fabrication of porous polymeric nanofibers with surface-enriched iron oxide nanoparticles: Composite filtration materials for removal of metal cations, Environmental Science: Nano, 5(3), 669-681.

199. Quan, J. (2018), Ausforming and tempering of a computationally designed ultra-high strength steel, M.S. thesis, 96 pp, University of California, Riverside, United States -- California.

200. Suksangpanya, N., N. A. Yaraghi, R. B. Pipes, D. Kisailus, & P. Zavattieri (2018), Crack twisting and toughening strategies in bouligand architectures, International Journal of Solids and Structures, 150, 83-106.

201. Tang, H., W. Chen, J. Wang, T. Dugger, L. Cruz, & D. Kisailus (2018), Electrocatalytic n-doped graphitic nanofiber – metal/metal oxide nanoparticle composites, Small, 14(11), 1703459.

202. Tarhan, L. G., N. J. Planavsky, X. Wang, E. J. Bellefroid, M. L. Droser, & J. G. Gehling (2018), The late-stage “ferruginization” of the Ediacara member (Rawnsley quartzite, South Australia): Insights from uranium isotopes, Geobiology, 16(1), 35-48.

203. Wang, X., L. Bai, H. Liu, X. Yu, Y. Yin, & C. Gao (2018), A unique disintegration–reassembly route to mesoporous titania nanocrystalline hollow spheres with enhanced photocatalytic activity, Advanced Functional Materials, 28(2), 1704208.

204. Warren, C., P. Sellappan, M. Aldosary, Y. Kodera, J. Shi, & J. Garay (2018), Synthesis and ferrimagnetic properties of Y3(1-x)Tm3xFe5O12 powders, paper presented at Spintronics XI, International Society for Optics and Photonics, 2018/09/20.

205. Wen, J. T., J. M. Roper, & H. Tsutsui (2018), Polydiacetylene supramolecules: Synthesis, characterization, and emerging applications, Industrial & Engineering Chemistry Research, 57(28), 9037-9053.

206. Weng, Z., Z.-h. Chen, X. Qin, & F. Zaera (2018), Sub-monolayer control of the growth of oxide films on mesoporous materials, Journal of Materials Chemistry A, 6(36), 17548-17558.

207. Wetteland, C. L., J. de Jesus Sanchez, C. A. Silken, N.-Y. T. Nguyen, O. Mahmood, & H. Liu (2018), Dissociation of magnesium oxide and magnesium hydroxide nanoparticles in physiologically relevant fluids, Journal of Nanoparticle Research, 20(8), 215.

208. Wetteland, C. L., & H. Liu (2018), Optical and biological properties of polymer-based nanocomposites with improved dispersion of ceramic nanoparticles, Journal of Biomedical Materials Research Part A, 106(10), 2692-2707.

209. Williams, M. T. (2018), Evaluation of metal emissions in electronic cigarettes, Ph.D. thesis, 334 pp, University of California, Riverside, United States -- California.

210. Woodard, A., K. Shojaei, G. Nava, & L. Mangolini (2018), Langmuir probe characterisation of an Ar-H2 non-thermal plasma loaded with carbon nanoparticles, Plasma Sources Science Technology, 27, 104003.

211. Woodard, A., K. Shojaei, G. Nava, & L. Mangolini (2018), Graphitization of carbon particles in a non-thermal plasma reactor, Plasma Chemistry and Plasma Processing, 38(4), 683-694.

212. Woodard, A., L. Xu, A. A. Barragan, G. Nava, B. M. Wong, & L. Mangolini (2018), On the non-thermal plasma synthesis of nickel nanoparticles, Plasma Processes and Polymers, 15(1), 1700104.

213. Yaraghi, N. A. (2018), Biomimetic designs for impact-resistant composite materials inspired by the heavily armored mantis shrimp, Ph.D. thesis, 175 pp, University of California, Riverside, United States -- California.

214. Yaraghi, N. A., & D. Kisailus (2018), Biomimetic structural materials: Inspiration from design and assembly, Annual Review of Physical Chemistry, 69(1), 23-57.

215. Yu, S., & N. V. Myung (2018), Minimizing the diameter of electrospun polyacrylonitrile (pan) nanofibers by design of experiments for electrochemical application, Electroanalysis, 30(10), 2330-2338.

216. Zhang, M., S.-D. Park, J. Kim, M. Nalbandian, S. Kim, Y. Choa, J. Lim, & N. V. Myung (2018), Synthesis and thermoelectric characterization of lead telluride hollow nanofibers, Frontiers in Chemistry, 6, 436.

217. Zhao, X., Y. Wang, D.-S. Li, X. Bu, & P. Feng (2018), Metal–organic frameworks for separation, Advanced Materials, 30(37), 1705189.

218. Zhao, Z., Y. Xing, H. Li, P. Feng, & Z. Sun (2018), Constructing CdS/Cd/ doped TiO2 z-scheme type visible light photocatalyst for H2 production, Science China Materials, 61(6), 851-860.

2019

219. Barragan, A. A., S. Hanukovich, K. Bozhilov, S. Yamijala, B. M. Wong, P. Christopher, & L. Mangolini (2019), Photochemistry of plasmonic titanium nitride nanocrystals, Journal of Physical Chemistry C, 123(35), 21796-21804.

220. Bogdanowicz, R., M. Ficek, M. Sobaszek, A. Nosek, Ł. Gołuński, J. Karczewski, A. Jaramillo-Botero, W. A. Goddard, M. Bockrath, & T. Ossowski (2019), Growth and isolation of large area boron-doped nanocrystalline diamond sheets: A route toward diamond-on-graphene heterojunction, Advanced Functional Materials, 29(3), 1805242.

221. Bozhilov, K. N., & V. Valtchev (2019), Zeolite crystal growth analysis by dissolution, Microscopy and Microanalysis, 25(S2), 816-817.

222. Chen, J., J. Feng, Z. Li, P. Xu, X. Wang, W. Yin, M. Wang, X. Ge, & Y. Yin (2019), Space-confined seeded growth of black silver nanostructures for solar steam generation, Nano Letters, 19(1), 400-407.

223. Clark, T. (2019), Nanocrystalline soft magnetic iron alloys, Ph.D. thesis, University of California, Riverside, United States -- California.

224. Clark, T., & S. N. Mathaudhu (2019), Microstructure and magnetic properties of dilute nanocrystalline fe-si prepared by high energy ball milling, Journal of Magnetism and Magnetic Materials, 484, 350-355.

225. Coleman, D., & L. Mangolini (2019), Plasmonic core–shell silicon carbide–graphene nanoparticles, ACS Omega, 4(6), 10089-10093.

226. Correa‐Garhwal, S. M., R. C. Chaw, T. Dugger, T. H. Clarke, K. H. Chea, D. Kisailus, & C. Y. Hayashi (2019), Semi-aquatic spider silks: Transcripts, proteins, and silk fibres of the fishing spider, dolomedes triton (pisauridae), Insect Molecular Biology, 28(1), 35-51.

227. Cortez Alcaraz, M. C., A. F. Cipriano, J. Lin, P. Soria, Q. Tian, & H. Liu (2019), Electrophoretic deposition of magnesium oxide nanoparticles on magnesium: Processing parameters, microstructures, degradation, and cytocompatibility, ACS Applied Bio Materials, 2(12), 5634-5652.

228. Davis, B. N. (2019), Design, fabrication, and characterization of optical and magnetic thin films for futuristic [doctoral dissertation, university of california, riverside], eScholarship Publishing.

229. Derimow, N., T. Clark, C. Roach, S. Mathaudhu, & R. Abbaschian (2019), Processing pathway effects in cocrcuni+x (fe, mn) high-entropy alloys, Philosophical Magazine, 99(15), 1899-1913.

230. Devaraj, A., W. Wang, R. Vemuri, L. Kovarik, X. Jiang, M. Bowden, J. R. Trelewicz, S. Mathaudhu, & A. Rohatgi (2019), Grain boundary segregation and intermetallic precipitation in coarsening resistant nanocrystalline aluminum alloys, Acta Materialia, 165, 698-708.

231. Exarhos, S., E. Palmes, & L. Mangolini (2019), Structural homogenization and cation ordering in czts films during sulfurization as probed via in-situ raman, Thin Solid Films, 684, 21-30.

232. Forghani, F., J. C. Han, J. Moon, R. Abbaschian, C. G. Park, H. S. Kim, & M. Nili-Ahmadabadi (2019), On the control of structural/compositional ratio of coherent order-disorder interfaces, Journal of Alloys and Compounds, 777, 1222-1233.

233. Germine, M., & J. H. Puffer (2019), Laryngeal lavage: A potential method of evaluation of amphibole fiber exposure, Journal of Occupational & Environmental Medicine, 61(6), 525-528.

234. Greenstein, K. E., N. V. Myung, G. F. Parkin, & D. M. Cwiertny (2019), Performance comparison of hematite (α-fe2o3)-polymer composite and core-shell nanofibers as point-of-use filtration platforms for metal sequestration, Water Research, 148, 492-503.

235. Gregory, D., I. Mukherjee, S. L. Olson, R. R. Large, L. V. Danyushevsky, A. S. Stepanov, J. N. Avila, J. Cliff, T. R. Ireland, R. Raiswell, P. H. Olin, V. V. Maslennikov, & T. W. Lyons (2019), The formation mechanisms of sedimentary pyrite nodules determined by trace element and sulfur isotope microanalysis, Geochimica et Cosmochimica Acta, 259, 53-68.

236. Jung, K. (2019), Engineering metal-oxide photoelectrode: Synthesis and application for renewable energy devices [doctoral dissertation, university of california, riverside].

237. Liu, D., X. Fan, X. Wang, D. Hu, C. Xue, Y. Liu, Y. Wang, X. Zhu, J. Guo, H. Lin, Y. Li, J. Zhong, D. Li, X. Bu, P. Feng, & T. Wu (2019), Cooperativity by multi-metals confined in supertetrahedral sulfide nanoclusters to enhance electrocatalytic hydrogen evolution, Chemistry of Materials, 31(2), 553-559.

238. Mensink, K. (2019), Laser energy interaction with novel fine-grained materials, Ph.D. thesis, 86 pp, University of California, Riverside.

239. Mensink, K., E. H. Penilla, P. Martínez-Torres, N. Cuando-Espitia, S. Mathaudhu, & G. Aguilar (2019), High repetition rate femtosecond laser heat accumulation and ablation thresholds in cobalt-binder and binderless tungsten carbides, Journal of Materials Processing Technology, 266, 388-396.

240. Mock, R. P., M. V. Schaefer, J. L. Pacheco, L. Lake, I. Lee, & S. C. Ying (2019), Influence of fe(ii) on arsenic(iii) oxidation by birnessite in diffusion-limited systems, ACS Earth and Space Chemistry, 3(4), 550-561.

241. Nunes, C. M. (2019), Interpretation of maximum absorbance data obtained from turbidimetry in plasma samples with varying fibrinogen concentration, Thesis, North-West University (South-Africa). Potchefstroom Campus.

242. Prech, J., K. N. Bozhilov, J. El Fallah, N. Barrier, & V. Valtchev (2019), Fluoride etching opens the structure and strengthens the active sites of the layered zsm-5 zeolite, Microporous and Mesoporous Materials, 280, 297-305.

243. Prikhodko, S. V., D. G. Savvakin, P. E. Markovsky, O. O. Stasiuk, N. Enzinger, F. Deley, B. Flipo, A. A. Shirzadi, H. M. Davies, P. D. Davies, J. Penny, K. Bozhilov, & O. M. Ivasishin (2019), Layered structures of ti-6al-4v alloy and metal matrix composites on its base joint by diffusion bonding and friction welding, Microscopy and Microanalysis, 25(S2), 812-813.

244. Saorin, A. (2019), Synthesis and characterization of gold nanorods.

245. Shahrezaei, S., D. C. Hofmann, & S. N. Mathaudhu (2019), Synthesis of amorphous/crystalline laminated metals via accumulative roll bonding, JOM, 71(2), 585-592.

246. Shahrezaei, S., Y. Sun, & S. N. Mathaudhu (2019), Strength-ductility modulation via surface severe plastic deformation and annealing, Materials Science and Engineering: A, 761, 138023.

247. Su, H. C., & N. V. Myung (2019), Synthesis of platinum and tin oxide co-functionalized single-walled carbon nanotubes (pt/sno ₂ /swnts) and their sensing properties toward carbon monoxide, Electroanalysis, 31(3), 437-447.

248. Tian, Q., C. Zhang, M. Deo, L. Rivera-Castaneda, N. Masoudipour, R. Guan, & H. Liu (2019), Responses of human urothelial cells to magnesium-zinc-strontium alloys and associated insoluble degradation products for urological stent applications, Materials Science and Engineering: C, 96, 248-262.

249. Williams, M., K. N. Bozhilov, & P. Talbot (2019), Analysis of the elements and metals in multiple generations of electronic cigarette atomizers, Environmental Research, 175, 156-166.

250. Woo, B. W. K. (2019), Enhancement of titanium-based biomedical microelectromechanical systems [doctoral dissertation, university of california, riverside], Ph.D. thesis, 180 pp, University of California, Riverside.

251. Yan, Y., C. Li, C. Liu, Z. Mutlu, B. Dong, J. Liu, C. S. Ozkan, & M. Ozkan (2019), Bundled and dispersed carbon nanotube assemblies on graphite superstructures as free-standing lithium-ion battery anodes, Carbon, 142, 238-244.

252. Yaraghi, N. A., A. A. Trikanad, D. Restrepo, W. Huang, J. Rivera, S. Herrera, M. Zhernenkov, D. Y. Parkinson, R. L. Caldwell, P. D. Zavattieri, & D. Kisailus (2019), The stomatopod telson: Convergent evolution in the development of a biological shield, Advanced Functional Materials, 29(34), 1902238.

253. Zhang, C., T. H. Wen, K. A. Razak, J. Lin, E. Villafana, H. Jimenez, & H. Liu (2019), Fabrication and characterization of biodegradable metal based microelectrodes for in vivo neural recording, MRS Advances, 4(46-47), 2471-2477.

254. Zhang, S., Y. Lu, C. Peng, H. Liu, & D.-e. Jiang (2019), Structure and interaction of ionic liquid monolayer on graphite from first-principles, The Journal of Physical Chemistry C, 123(1), 618-624.